![]() If you have access to it, you can use a circular saw with a tooth blade to make your cuts cleaner and more accurate but a straight saw should suffice too. The saw that you're confident and comfortable in using should work. If you have access to it, you can also use a scribing tool to get even more accurate markings with your measurements. A simple pencil should suffice to mark the areas of your filler piece that you need to cut. The belt sander tool is also perfect for smoothing out the sides of the filler piece to make the fit even more snug. It’s better to slowly sand down to the size that you need rather than risk over cutting the filler piece. Simply sawing the filler piece may result in jagged edges or wood on the sides. That’s why the tape measure is an essential tool that you’ll be needing to know the ideal size of the filler strip. This means that they’re seldom the exact size that you need to fill in the gap in your kitchen. These are essentially pieces of wood that come in a general size. Cabinet manufacturers will usually package in filler strips that you can use. Materials You’ll Need Before Installing Your Filler Strips Once you're confident with the size, slide it between the gaps to attach it. Cut the filler strips to match your measurements. First, you’ll need to measure the gaps between cabinets and the wall or the gap between an adjacent cabinet if you have a corner cabinet. ![]() So how can filler strips be installed between kitchen cabinets? You may either have upper cabinets or base cabinets, but the process is typically the same. ![]() Since kitchens are seldom alike in size, dimensions, and design, installing cabinet filler strips will require some handy work to make it fit. They’re usually included with the package of your cabinet, but they’re not often the exact size to fit your kitchen. Installing filler strips between your kitchen cabinets can be a tedious process. ![]()
0 Comments
Leave a Reply. |